Skystar F7+KM60 Blheli_32 Fly Stack 30x30

This stack from Skystars has a rigid construction and plenty of features. Firstly, starting with the FC, the Skystars HD Pro FC is on the F7 chipset, giving it better future support for Betaflight and other flight control software as they grow in file size. The KM60 ESC offers a max output of 60 amps and can be used with 3-6S batteries. This stack has 30x30mm mounting holes, making it perfect for a variety of freestyle/long-range 5-7" builds.

Package includes:

1x SkyStarsRC Fly Stack F7 HD Pro3 3-6S 30x30 Stack/Combo (F722 FC / KM60 32Bit 60A 4in1 ESC)
4x Damping Rubbers (M3x3.5mm)
1x XT60 connector and wires
2x 8pin wiring harness (1x 70mm,1x 50mm)
1x 35v 560uf Capacitor

Specs:

SkyStarsRC F7HD

• MCU: STM32F722RGT6 216MHz
• Gyroscope: BMI270
• Baro: Bmp280
• OSD: Betaflight SPI OSD DJI HD OSD(UART6)
• Black box: 16MB
• 6x Uarts: UART 1/2/3/4/5/6
• 4x PWM outputs
• 1x I2C
• 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
• USB Type-C(USB2.0)
• 1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
• 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
• VTX 10V/Vbat filtered power ON/OFF switch
• DJI FPV OSD is supported by any spare UART
• LED: 4 LED independent pads, support WS2812 programming lamp output. Receiver: Support Sbus, CRSF, IBUS, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can actually be installed in any spare UART.

KM60 60A 4in1 ESC

• Input Battery: 3-6S LiPo
• Con. Current: 60A
• Peak Current: 70A≥ 10S
• Firmware: BLHeli_32
• Support: Dshot 600/1200
• Mounting pattern: 30.5mm/M3
• BEC: No
• Product size: 41x46x7.6mm
• Weight: 17g about